Bullet midrange pair
OGPRO69A
6×9″ · 100 W RMS · 4 ohm
Goes in the factory 6x9 locations and puts back the mid-bass that stock speakers lose at volume. The pair takes 100 W RMS; check brackets and clearance for your vehicle.
- 30-day returns · No questions asked
- Ships in 2–3 business days · Free shipping on every US order
Factory 6x9 upgrade with 100W RMS and real mid-bass punch.
The OGPRO69A is a pair of 6x9 bullet midrange speakers for factory locations that sound thin once the volume rises. Rated 100W RMS (200W Max) with dual 4-ohm voice coils, 93.1 dB sensitivity and a 70 Hz–10 kHz response, it puts real mid-bass energy into the cabin. A 1.51-inch two-layer CCAW voice coil, ferrite magnet, paper cone and steel basket carry the load. Cutouts vary by vehicle, so confirm adapter brackets and clearance for the 9.25 x 6.49 x 3.85-inch body, then match amplifier RMS to the rating.
See the full specs→- Mid-Bass ReachA 70 Hz–10 kHz response with Fs at 69 Hz fills out the mid-bass that thin factory 6x9s drop.
- 100W RMS RatingRated 100W RMS and 200W Max, so match your amplifier's clean RMS output to the speaker for headroom.
- Flexible Coil WiringDual 4-ohm voice coils with dual 3.2-ohm DC resistance give you wiring choices around your amplifier's stable load.
- Big Cone Area209.4 cm² of cone area and a 37.07 oz ferrite magnet put real weight behind every mid-bass note.
RMS POWER · CONTINUOUS
100 Watt
MAX POWER · SHORT PEAK
200 Watt
Match your amp to the RMS number
RMS is the power it handles continuously. Max is a short peak it can take.
YOUR AMP · RMS @ 2 / 8 Ω
100 W
The details
Two coils on their own terminals.
Around a 0.23″ magnetic gap.
Paper cone. 2.15 kg (4.7 lb) net weight.
0.44″ tall, CCAW wire on a kapton bobbin.
- Size
- 6×9″
- Type
- Bullet midrange
- DC resistance
- Dual 3.2 ohm
- Cone
- Paper
- Basket
- Steel
- Dimensions
- 9.25 × 6.49 × 3.85″
- Weight
- 2.15 kg (4.7 lb)
- Sold as
- Pair
- RMS power
- 100 W
- Max power
- 200 W
- Impedance
- Dual 4 ohm
- Sensitivity
- 93.1 dB
- Response
- 70 Hz–10 kHz
- Voice coil
- 1.51″ diameter, 0.44″ tall
- Winding
- 2 layers, CCAW wire
- Bobbin
- Kapton
- Magnet
- Ferrite, 37.07 oz
- Magnetic gap
- 0.23″
- Fs
- 69 Hz
- Qts
- 0.51
- Qes
- 0.54
- Qms
- 9.17
- Vas
- 21.6 L
- Mms
- 15.1 g
- Cms
- 0.34
- Sd
- 209.4 cm²
- BL
- 6.2 T·m
- Xmax
- 0.1″
Goes well with
Picked by the numbers on each spec sheet: power at the load it wires to, and parts sized to fit.
-
OG25T3.8″100 W RMS105 dBBullet tweeters for the highs above these mids, 2.5–20 kHz.
$50
-
OGS1200.4D1,200 W RMS250 W ×4 at 4 ohmFour channels at 250 W RMS each into 4 ohm. Set the gain to the speakers' rating.
$329
-
OGPRO65A6.5″75 W RMS4 ohm6.5-inch bullet mids, rated 75 W RMS with a 145 Hz–10 kHz response.
$169
Questions
Reach the OG Audio team for product questions, order support, warranty claims, and tuning help.
Rated 100W RMS with 200W Max. Match your amplifier's clean RMS output to the 100W rating for headroom.
Series gives 8 ohms and parallel gives 2 ohms, so you can choose the final load around your amplifier's stable load.
The body measures 9.25 × 6.49 × 3.85 inches. Cutouts vary by vehicle, so confirm adapter brackets, the opening and depth clearance before ordering.
A 70 Hz–10 kHz response with Fs at 69 Hz fills out the mid-bass that thin factory 6x9s drop. A 209.4 cm² cone area and 37.07 oz ferrite magnet add weight. Sold as a pair.
Talk to us
Not sure it fits your build? Ask the OG Audio team before you order.
Contact us
