Amplifier fan
OGS2000FAN
Stackable · For OGS2000A.1D
Cooling you can add after the install is finished: it sits under the OGS2000A.1D, inside its footprint, so the rack layout stays the same. Give the rack a way in and a way out for air.
- 30-day returns · No questions asked
- Ships in 2–3 business days · Free shipping on every US order
Add cooling to an OGS2000A.1D build without reworking the rack.
The OGS2000FAN is a stackable cooling fan made for the OGS2000A.1D amplifier. It sits under the amp, inside its footprint, so you can add thermal management to a finished build by lifting the amplifier, fitting the fan to the board and setting the amp back on top. It moves air across the amplifier so heat has somewhere to go during long, hard runs. Confirm the amp is the OGS2000A.1D before you buy, since the fan is matched to that model, and leave the rack an intake and an exhaust path.
See the full specs→- Specific FitmentMatched to the OGS2000A.1D, not specified for other amplifiers.
- Stackable DesignIt sits under the amplifier, inside its footprint, so the rack layout stays the same.
- Intake And ExhaustA fan can only help if the rack lets air in and heated air out.
The details
- Fits
- OGS2000A.1D
- Mounting
- Under the amplifier: 4 × M4×35 screws fan to board, 4 × M4×45 screws amp to fan
- Dimensions
- 19.17 × 6.22 × 1.29″ (L × W × H)
- Connection
- Angled DC plug on a 3.93″ cable
- Fan speed
- 3,500 RPM
- Blades
- 11
- Bearing
- Oil-impregnated
- Voltage
- 12 V DC
Goes well with
Picked by the numbers on each spec sheet: power at the load it wires to, and parts sized to fit.
Questions
Reach the OG Audio team for product questions, order support, warranty claims, and tuning help.
It fits the OGS2000A.1D. The fan is matched to that model and not specified for other amplifiers, so confirm your amp before you buy.
Yes. The fan goes under the amplifier: lift the amp off the board, fix the fan to the board with four M4×35 screws, fix the amp on top with four M4×45 screws and connect the provided cable. At 19.17″ long and 6.22″ wide it stays inside the amp's footprint, so the rack layout stays the same; the stack gets 1.29″ taller.
It moves air across the amplifier so heat has somewhere to go. A fan only helps if the rack lets air in and heated air out, so keep an intake and an exhaust path.
Talk to us
Not sure it fits your build? Ask the OG Audio team before you order.
Contact usMore accessories & fans
