Shallow subwoofer
OGSS10500AD4
10″ · 500 W RMS · Dual 4 ohm
Bass for the places a full-depth sub cannot go: trucks, sports cars, tight custom builds. It is only 10.4 x 4.8 inches in all and still takes 500 W RMS.
- 30-day returns · No questions asked
- Ships in 2–3 business days · Free shipping on every US order
Small depth, big 10-inch bass for trucks and tight installs.
The OGSS10500AD4 puts 10-inch bass into trucks, sports cars and custom builds where a full-depth sub will not fit, in a package just 10.4 x 4.8 inches overall. It handles 500W RMS (1,000W Max) on a 63.69 oz ferrite motor, with a die-cast aluminum basket that eliminates flex under pressure and a 2.5-inch, 4-layer copper voice coil. Every unit is SPL-tested and competition-certified before it ships. Dual 4-ohm impedance lets you wire the coils in parallel for a 2-ohm load or in series for 8 ohms, so the final load fits your amplifier.
See the full specs→- Slim Shallow ProfileMeasures 10.4 x 4.8 inches overall, made for installs where full-depth subwoofers will not fit.
- Honest 500W RMSRated at 500W RMS (1,000W Max), so you can match amplifier power to the number that counts.
- Die-Cast Aluminum BasketEliminates flex under pressure, so the low-profile frame does not give up rigidity.
- Dual 4-Ohm WiringWire the coils in parallel for a 2-ohm load or in series for 8 ohms.
RMS POWER · CONTINUOUS
500 Watt
MAX POWER · SHORT PEAK
1,000 Watt
Match your amp to the RMS number
RMS is the power it handles continuously. Max is a short peak it can take.
YOUR AMP · RMS @ 2 / 8 Ω
500 W
The details
Two coils on their own terminals.
Around a 0.39″ magnetic gap.
Paper cone. 6.3 kg (13.9 lb) net weight.
1.18″ tall, copper wire on a black aluminum bobbin.
Frequency response
44–300 Hz- Size
- 10″
- DC resistance
- Dual 3.2 ohm
- Cone
- Paper
- Basket
- Die-cast aluminum
- Dimensions
- 10.4 × 4.8″
- Weight
- 6.3 kg (13.9 lb)
- Mounting
- Shallow
- RMS power
- 500 W
- Max power
- 1,000 W
- Impedance
- Dual 4 ohm
- Sensitivity
- 83.1 dB
- Response
- 44–300 Hz
- Voice coil
- 2.5″ diameter, 1.18″ tall
- Winding
- 4 layers, copper wire
- Bobbin
- Black aluminum
- Magnet
- Ferrite, 63.69 oz
- Magnetic gap
- 0.39″
- Fs
- 44 Hz
- Qts
- 0.76
- Qes
- 0.85
- Qms
- 6.23
- Vas
- 11.3 L
- Mms
- 226.3 g
- Cms
- 0.05
- Sd
- 352.99 cm²
- BL
- 12.3 T·m
- Xmax
- 0.39″
Goes well with
Picked by the numbers on each spec sheet: power at the load it wires to, and parts sized to fit.
Questions
Reach the OG Audio team for product questions, order support, warranty claims, and tuning help.
It measures 10.4 × 4.8 inches overall and weighs 6.3 kg (13.9 lb), made for trucks, sports cars and custom builds where a full-depth sub will not fit. Measure your clearance before ordering.
Match the amplifier to 500W RMS delivered cleanly at your final load. The 1,000W Max rating is the peak ceiling, so size to the RMS number.
Parallel gives a 2 ohm load and series gives 8 ohms, so the final load can fit your amplifier.
Rated response is 44–300 Hz, with Fs at 44 Hz and 83.1 dB sensitivity. Linear excursion (Xmax) is 0.39 inches.
Talk to us
Not sure it fits your build? Ask the OG Audio team before you order.
Contact usMore shallows
