OG Bronze · WS series · High Efficiency
OGWS10600AD4
10″ subwoofer · 600 W RMS · Dual 4 ohm
A compact 10 that still handles 600 W RMS. It suits an everyday system that is short on space, and its two 4 ohm coils wire to 2 ohm or 8 ohm for your amp.
- 30-day returns · No questions asked
- Ships in 2–3 business days · Free shipping on every US order
Compact 10-inch punch for daily systems that want real bass.
The OGWS10600AD4 is a 10-inch driver built to give daily systems honest, hard-hitting bass. It delivers 600W RMS (1,200W Max) on a 97.68 oz ferrite magnet, a die-cast aluminum basket that eliminates flex under pressure, and a 4-layer copper voice coil wound on a black aluminum bobbin. It ships SPL-tested and competition-certified. With dual 4-ohm impedance, you choose the final load: wire the coils in parallel for 2 ohms or in series for 8 ohms, then match whichever load your monoblock amplifier drives cleanly.
See the full specs→- Honest 600W RMSRated at 600W RMS (1,200W Max), so you can size your amplifier to a real continuous number.
- Cast Aluminum BasketA die-cast aluminum frame eliminates flex under pressure and keeps the motor assembly aligned.
- Precision Build4-layer copper voice coil on a black aluminum bobbin, paired with a non-pressed Kraft pulp fiber cone.
- Dual 4-Ohm VersatilityWire the coils in parallel for a 2-ohm load or in series for 8 ohms to suit your amplifier.
RMS POWER · CONTINUOUS
600 Watt
MAX POWER · SHORT PEAK
1,200 Watt
Match your amp to the RMS number
RMS is the power it handles continuously. Max is a short peak it can take.
YOUR AMP · RMS @ 2 / 8 Ω
600 W
The details
Two coils on their own terminals. The Thiele/Small figures are measured with the coils in parallel.
Around a 0.31″ magnetic gap.
Kraft pulp fiber, non-pressed cone. 6.09 kg (13.4 lb) net weight.
1.37″ tall, copper wire on a black aluminum bobbin.
Frequency response
39–300 HzRecommended box
Sealed 0.75–1.25 cu ft or ported 1.25–1.75 cu ft- Size
- 10″
- DC resistance
- Dual 3.2 ohm
- Cone
- Kraft pulp fiber, non-pressed
- Basket
- Die-cast aluminum
- Dimensions
- 10.35 × 7″
- Weight
- 6.09 kg (13.4 lb)
- Recommended box
- Sealed 0.75–1.25 cu ft or ported 1.25–1.75 cu ft, tuned ~35 Hz
- Series
- OG Bronze · WS
- RMS power
- 600 W
- Max power
- 1,200 W
- Impedance
- Dual 4 ohm
- Sensitivity
- 82.5 dB
- Response
- 39–300 Hz
- Voice coil
- 2.4″ diameter, 1.37″ tall
- Winding
- 4 layers, copper wire
- Bobbin
- Black aluminum
- Magnet
- Ferrite, 97.68 oz
- Magnetic gap
- 0.31″
- Fs
- 39 Hz
- Qts
- 0.61
- Qes
- 0.68
- Qms
- 6.03
- Vas
- 11 L
- Mms
- 188.75 g
- Cms
- 0.07
- Sd
- 298.6 cm²
- BL
- 10.9 T·m
- Xmax
- 0.53″
- Measured with
- Coils in parallel
Goes well with
Picked by the numbers on each spec sheet: power at the load it wires to, and parts sized to fit.
-
OGS1200A.1D1,200 W RMS1 ohm stableFor two of these: wired to 1 ohm they share 1,200 W RMS, 600 W each. An exact match.
$279
-
OGS1500A.1D1,500 W RMS1 ohm stableOne sub at 2 ohm gets 930 W RMS: over its 600 W rating and under the 1,200 W Max, so set the gain with care.
$349
-
OG2X10Dual 10″PortedA ported box for two 10-inch drivers. Check cutout and mounting depth before you order.
$179
Questions
Reach the OG Audio team for product questions, order support, warranty claims, and tuning help.
OG Audio recommends sealed at 0.75–1.25 cu ft, or ported at 1.25–1.75 cu ft tuned to about 35 Hz. Those are the enclosure volumes listed for this 10-inch driver.
Plan on an amplifier that delivers 600W RMS cleanly at your final load. The 1,200W Max rating is the peak ceiling, so size the amplifier to the RMS number, not the Max.
Parallel gives a 2 ohm final load. Series gives 8 ohms. Choose the load your monoblock amplifier drives cleanly.
Rated response is 39–300 Hz, with Fs at 39 Hz and 82.5 dB sensitivity. Linear excursion (Xmax) is 0.53 inches.
Talk to us
Not sure it fits your build? Ask the OG Audio team before you order.
Contact us