OG Silver · WX series · Extreme Sound
OGWX121000AD4
12″ subwoofer · 1,000 W RMS · Dual 4 ohm
Run one or run two: the 4 ohm coils make this 12 easy to wire in either setup. It takes 1,000 W RMS and plays hard enough for a serious everyday system.
- 30-day returns · No questions asked
- Ships in 2–3 business days · Free shipping on every US order
Dual 4-ohm 12-inch power made for single or twin-sub setups.
The OGWX121000AD4 brings hard-hitting 12-inch output to serious daily systems. Rated at 1,000W RMS (2,000W Max), it is built around a 152.48 oz ferrite motor, a die-cast aluminum basket that eliminates flex under pressure, and a 4-layer copper voice coil on a black aluminum bobbin. Each unit is SPL-tested and competition-certified before it ships. The dual 4-ohm coils give you two clean ways to load your amplifier: wire them in series for an 8-ohm final load, or in parallel for a 2-ohm final load.
See the full specs→- Extreme Power HandlingDelivers 1,000W RMS (2,000W Max) and is engineered to absorb extreme power bursts without failure.
- Die-Cast Aluminum BasketEliminates flex under pressure around a 152.48 oz ferrite motor and 3.0-inch voice coil.
- Competition-Grade BuildSPL-tested and competition-certified before it ships, with a 4-layer copper voice coil and non-pressed Kraft pulp fiber cone.
- Dual 4-Ohm VersatilityWire to a 2-ohm or 8-ohm final load to match your amplifier's stable impedance.
RMS POWER · CONTINUOUS
1,000 Watt
MAX POWER · SHORT PEAK
2,000 Watt
Match your amp to the RMS number
RMS is the power it handles continuously. Max is a short peak it can take.
YOUR AMP · RMS @ 2 / 8 Ω
1,000 W
The details
Two coils on their own terminals. The Thiele/Small figures are measured with the coils in parallel.
Around a 0.47″ magnetic gap.
Kraft pulp fiber, non-pressed cone. 11.25 kg (24.8 lb) net weight.
1.77″ tall, copper wire on a black aluminum bobbin.
Frequency response
39–300 Hz- Size
- 12″
- DC resistance
- Dual 2.8 ohm
- Cone
- Kraft pulp fiber, non-pressed
- Basket
- Die-cast aluminum
- Dimensions
- 12.44 × 8.38″
- Weight
- 11.25 kg (24.8 lb)
- Series
- OG Silver · WX
- RMS power
- 1,000 W
- Max power
- 2,000 W
- Impedance
- Dual 4 ohm
- Sensitivity
- 82.3 dB
- Response
- 39–300 Hz
- Voice coil
- 3.0″ diameter, 1.77″ tall
- Winding
- 4 layers, copper wire
- Bobbin
- Black aluminum
- Magnet
- Ferrite, 152.48 oz
- Magnetic gap
- 0.47″
- Fs
- 39 Hz
- Qts
- 1.02
- Qes
- 1.23
- Qms
- 6.14
- Vas
- 22.9 L
- Mms
- 206.9 g
- Cms
- 0.07
- Sd
- 471.4 cm²
- BL
- 7.92 T·m
- Xmax
- 0.64″
- Measured with
- Coils in parallel
Goes well with
Picked by the numbers on each spec sheet: power at the load it wires to, and parts sized to fit.
-
OGS1500A.1D1,500 W RMS1 ohm stable930 W RMS at 2 ohm, with the coils in parallel. Just under its 1,000 W rating.
$349
-
OGS2000A.1D2,000 W RMS1 ohm stableFor two of these: wired to 1 ohm they share 2,000 W RMS, 1,000 W each. An exact match.
$449
-
OG2X12EDual 12″PortedA ported box for two 12-inch drivers. Check cutout and mounting depth before you order.
$220
-
OG12GRILL12″High excursionA high-excursion grill sized for 12-inch subwoofers.
$20
Questions
Reach the OG Audio team for product questions, order support, warranty claims, and tuning help.
Choose a monoblock that delivers about 1,000 W RMS at the final load you wire, 2 ohm in parallel or 8 ohm in series. Size to the RMS rating, not the Max.
Parallel gives a 2 ohm final load and series gives 8 ohm. Match the load to your monoblock's rated stable impedance, and confirm it before wiring to 2 ohm.
2,000 W Max is the burst ceiling above the 1,000 W RMS continuous rating. Match your amplifier to the RMS figure, the level the driver is built to hold across a sustained run.
Rated response is 39–300 Hz at 82.3 dB sensitivity. Free-air resonance (Fs) is 39 Hz and maximum linear excursion is 0.64 inch.
Tuning
Our dealers offer tuning appointments for Gold and Silver tier builds.
Contact us to scheduleMore 12″ subwoofers
