OG Silver · WX series · Extreme Sound
OGWX151000AD4
15″ subwoofer · 1,000 W RMS · Dual 4 ohm
Clean, strong bass out of a 15-inch Kraft pulp cone, good for 1,000 W RMS every day. The 4 ohm coils keep wiring simple: 2 ohm in parallel, 8 ohm in series.
- 30-day returns · No questions asked
- Ships in 2–3 business days · Free shipping on every US order
A 15-inch daily thumper with dual 4-ohm coils for easy wiring.
The OGWX151000AD4 is the 15-inch Silver driver for strong, clean daily bass at 1,000W RMS (2,000W Max). Its 152.48 oz ferrite motor and 4-layer copper voice coil sit inside a die-cast aluminum basket that eliminates flex under pressure, and the cone is non-pressed Kraft pulp fiber. SPL-tested and competition-certified before it ships, it covers a rated 32–300 Hz. Dual 4-ohm impedance gives you a choice of final loads, 8 ohms in series or 2 ohms in parallel, whichever your monoblock amplifier runs cleanest.
See the full specs→- Extreme Power HandlingHolds 1,000W RMS (2,000W Max) on a 15-inch cone, engineered to absorb extreme power bursts without failure.
- Die-Cast Aluminum BasketEliminates flex under pressure around a 152.48 oz ferrite motor and 3.0-inch voice coil.
- Competition-Grade BuildSPL-tested and competition-certified before it ships, with a 4-layer copper voice coil on a black aluminum bobbin.
- Dual 4-Ohm VersatilityWire to a 2-ohm or 8-ohm final load to match your amplifier's stable impedance.
RMS POWER · CONTINUOUS
1,000 Watt
MAX POWER · SHORT PEAK
2,000 Watt
Match your amp to the RMS number
RMS is the power it handles continuously. Max is a short peak it can take.
YOUR AMP · RMS @ 2 / 8 Ω
1,000 W
The details
Two coils on their own terminals. The Thiele/Small figures are measured with the coils in parallel.
Around a 0.47″ magnetic gap.
Kraft pulp fiber, non-pressed cone. 12.5 kg (27.6 lb) net weight.
1.77″ tall, copper wire on a black aluminum bobbin.
Frequency response
32–300 Hz- Size
- 15″
- DC resistance
- Dual 2.8 ohm
- Cone
- Kraft pulp fiber, non-pressed
- Basket
- Die-cast aluminum
- Dimensions
- 15.43 × 9.25″
- Weight
- 12.5 kg (27.6 lb)
- Series
- OG Silver · WX
- RMS power
- 1,000 W
- Max power
- 2,000 W
- Impedance
- Dual 4 ohm
- Sensitivity
- 86 dB
- Response
- 32–300 Hz
- Voice coil
- 3.0″ diameter, 1.77″ tall
- Winding
- 4 layers, copper wire
- Bobbin
- Black aluminum
- Magnet
- Ferrite, 152.48 oz
- Magnetic gap
- 0.47″
- Fs
- 32 Hz
- Qts
- 0.81
- Qes
- 0.93
- Qms
- 5.99
- Vas
- 71.8 L
- Mms
- 272.05 g
- Cms
- 0.08
- Sd
- 754.7 cm²
- BL
- 9.08 T·m
- Xmax
- 0.64″
- Measured with
- Coils in parallel
Goes well with
Picked by the numbers on each spec sheet: power at the load it wires to, and parts sized to fit.
Questions
Reach the OG Audio team for product questions, order support, warranty claims, and tuning help.
Choose a monoblock that delivers about 1,000 W RMS at the final load you wire, 2 ohm in parallel or 8 ohm in series. Size to the RMS rating, not the Max.
Parallel gives a 2 ohm final load and series gives 8 ohm. Match the load to your monoblock's rated stable impedance, and confirm it before wiring to 2 ohm.
2,000 W Max is the burst ceiling above the 1,000 W RMS continuous rating. Match your amplifier to the RMS figure, the level the driver is built to hold across a sustained run.
Overall dimensions are 15.43 × 9.25 inches and it weighs 12.5 kg (27.6 lb). Check both against your baffle and box before you cut.
Tuning
Our dealers offer tuning appointments for Gold and Silver tier builds.
Contact us to scheduleMore 15″ subwoofers
